Technical features of ENplus A1 wood pellets:
- They have a diameter of about 5mm-9mm.
- Their length is about 5 times their diameter, about 3.15 mm -40mm.
- Their ash content is less than 0.7%.
- They have a moisture content of less than 10%.
- Their heat of combustion is more than 18 MJ/kg.
- The abrasion or the dust content in these high-quality pellets are less than 1%.
- Their hardness is more than 98%.
- They have a bulk density of more than 600-750 kg/m3.
- Their ash deformation temperature of more than 1200°C.
- The nitrogen content is less than 3%.
- The sulfur content is less than 0.04%.
- The chlorine content is less than 0.02%.
- The arsenic is less than 1 mg/kg 3
- The Cadmium is less than 0.5mg/kg 3.
- Chromium, copper, nickel and lead each is less than 10mg/kg3.
- Mercury is less than 0.1mg/kg3.
- Zinc is less than 100 mg/kg3.
Specialties of ENplus certified wood pellets:
If a supplier shows you an ENplus certificate, it means that the products have exceeded the specifications mentioned above. They have superior quality compared to other non-certified products
The operations of the boiler are affected by the fines present in the pellets, some of which can’t be controlled by the supplier, because they depend on controlling the blowing distance, the number of bends in the pipe and the frequency of cleaning your stove.
What the pellet supplier can do is, he can decrease the delivered fines within the constraints of installation. So, the actual amount is dependent on the installation characteristics, a technology that is used for delivery, driver’s skills and the pellet strength.
The mechanical durability of the pellets is determined through a PDI test. When this factor is high, there are fewer fines generated while delivery. When there are tough delivery conditions, it is essential that the durability of the pellets should exceed their general specifications. Also, when there are multiple handlings of the wood pellets, such as if they are imported, then, a high durability is of prime importance. This is necessary because pellets with low durability will shed a large number of fines while undergoing a lot of stress during transportation, which will significantly reduce the length of the remaining pellets.
The screening and sampling systems used for the ENplus certification of the A1 pellets are loaded with fines that are less than 1%.
Why should you always opt for ENplus wood pellets?
You can be sure about getting the best performance of the products that come with an ENplus logo because they are of a higher standard.
2.Reduction of maintenance cost:
The ENplus wood pellets have a high calorific value of about 4.6kWhr/kg. low moisture content and also low ash content because of which they ensure clean burning and reduce the maintenance cost significantly.
3.Best quality throughout the supply chain:
It is not that the ENplus certified wood pellets have a superior quality, but the standards are applicable to the whole supply chain, which starts right from the production till they arrive at the pellet store. Thus, the best quality pellet at every stage. They are aligned to the ISO 9001 by following a strong complaint and traceability process. There is the use of ENplus accredited delivery fleet which is fully equipped with ‘on-board’ weighing systems that are calibrated and legalized for trading.
Packaging and delivery of ENplus wood pellets:
The products which are imported have a high durability limit than the general ENplus A1 spec. In order to reduce the fines in the delivered packages, we try to ensure a gentle delivery of the hardest and cleanest pellets.
The pellets are transported in bulk through specialized vehicles in order to decrease the environmental impact and the carbon footprint. Before delivering the wood pellets into the ENplus delivery vehicles, they are screened to reduce the fines content. The deliveries are grouped in the local are to decrease the fuel emissions.
Where to buy ENplus wood pellets in bulk?
Our company supplies ENplus certified wood pellets worldwide. So, you can rely on our product quality. We ship the products through our trusted courier partners. They take utmost care to make sure that the products reach you safely. We always make sure that the products are in stock in our warehouses, so that they can be shipped quickly whenever we receive the orders. This helps in the faster delivery of the products to the end customers.
Why choose us?
Purchasing the right quality of pellets is quite important because the low-quality pellets do not serve their purpose and also create pollution. The ENplus pellets are high standard pellets which are produced after undergoing a lot of quality checks. This ensures that the product which reaches you is worth every penny you have spent on it.
Not only this, we supply the product at a wholesale rate to our customers, because we get the orders in bulk directly from the manufacturers. Thus choosing us will help you crack a deal in a price that is lesser than most other suppliers in the market.
The customer support team is also ever ready to serve you whenever you face a problem regarding the purchasing delivery or even any doubts about the product itself. So, if you purchase from us, be sure to have a smooth hassle-free experience throughout the process.
There are no reviews yet.